Health risk assessment of exposure to benzene, toluene, ethyl benzene, and xylene in shoe industry-related workplaces.

Benzene, toluene, ethyl benzene, and xylene (BTEX) are prevalent pollutants in shoe industry-related workplaces. The aim of this study was to assess exposure to BTEX and their carcinogenic and non-carcinogenic risks in shoe-industry-related workplaces. This study was carried out at different shoe manufactures, small shoe workshop units, shoe markets, and shoe stores in Tabriz, Iran in 2021. Personal inhalation exposure to BTEX was measured using the National Institute for Occupational Safety and Health (NIOSH) 1501 method. Carcinogenic and non-carcinogenic risks due to inhalation exposure to BTEX were estimated by United States Environmental Protection Agency (U.S. EPA) method based on Mont Carlo simulation. Results showed that the concentrations of benzene and toluene were higher than the threshold limit value (TLV) in both gluing and non-gluing units of shoe manufactures. The total carcinogenic risk (TCR) due to exposure to benzene and ethyl benzene was considerable in all shoe industry-related workplaces. Also, the hazard index (HI) as a non-carcinogenic index was higher than standard levels in all shoe industry-related workplaces. Therefore, shoe industry-related workers are at cancer and non-cancer risks due to exposure to BTEX. Prevention measures need to be implemented to reduce the concentration of BTEX in shoe industry-related workplaces.

Recent Progresses in Development of Biosensors for Thrombin Detection.

Thrombin is a serine protease with an essential role in homeostasis and blood coagulation. During vascular injuries, thrombin is generated from prothrombin, a plasma protein, to polymerize fibrinogen molecules into fibrin filaments. Moreover, thrombin is a potent stimulant for platelet activation, which causes blood clots to prevent bleeding. The rapid and sensitive detection of thrombin is important in biological analysis and clinical diagnosis. Hence, various biosensors for thrombin measurement have been developed. Biosensors are devices that produce a quantifiable signal from biological interactions in proportion to the concentration of a target analyte. An aptasensor is a biosensor in which a DNA or RNA aptamer has been used as a biological recognition element and can identify target molecules with a high degree of sensitivity and affinity. Designed biosensors could provide effective methods for the highly selective and specific detection of thrombin. This review has attempted to provide an update of the various biosensors proposed in the literature, which have been designed for thrombin detection. According to their various transducers, the constructions and compositions, the performance, benefits, and restrictions of each are summarized and compared.

Fabrication of amphotericin B-loaded electrospun core-shell nanofibers as a novel dressing for superficial mycoses and cutaneous leishmaniasis.

Amphotericin B (AmB) is an antifungal and antiparasitic agent that is the main drug used for the treatment of mycoses infections and leishmaniasis. However, its high toxicity and side effects are the main difficulties attributed to its application. In this study, to minimize its harmful effects, AmB-loaded core-shell nanofibers were fabricated, using polyvinyl alcohol, chitosan, and AmB as the core, and polyethylene oxide and gelatin as the shell-forming components. The nanofibers were characterized, using scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, tensile test, drug release, and MTT assay. The results showed that the prepared nanofibers were smooth and had a core-shell structure with almost no cytotoxicity against fibroblast cells and the release study suggested that the core-shell structure decreased the burst release. The disk diffusion assay revealed that the nanofibrous mats at different AmB concentrations exhibited significant activity against all the eight evaluated fungal species with the inhibition zones of 1.4-2.6 cm. The flow cytometry assay also showed that the prepared nanofibrous mat significantly killed Leishmania major promastigotes up to 84%. The obtained results indicated that this AmB-loaded nanofibrous system could be a suitable candidate for a topical drug delivery system for the treatment of both superficial mycoses and cutaneous leishmaniasis.

Antimicrobial core-shell electrospun nanofibers containing Ajwain essential oil for accelerating infected wound healing.

Treatment of skin injuries is still facing major challenges, such as chronicity and infections, particularly those caused by multi-drug resistance pathogens. An effective treatment of such wounds should accelerate the wound healing process while preventing bacterial contamination. Here, a novel core-shell nanofiber mat was fabricated comprising gelatin/polyvinyl alcohol (as a core) and aloe vera/arabinose/polyvinylpyrrolidone (as a shell) for accelerating the healing process of bacteria-infected wounds. Trachyspermum Ammi (Ajwain) essential oil (EO), as a potent and natural antimicrobial agent against microorganisms, was incorporated into the core of nanofiber mats using coaxial electrospinning. The microscopy images demonstrated the successful fabrication of the core-shell structure with a uniform fiber size of 564 ± 106.35 nm. Moreover, Ajwain EO-loaded nanofiber mat (core-shell/EO) provided excellent antimicrobial activity and antioxidant ability. The in vitro and ex vivo release of Ajwain EO from the fabricated nanofiber mat corroborated a prolonged release profile. Furthermore, in vivo antibacterial activity, wound closure, and histomorphological examinations showed the high efficacy of the core-shell/EO mat in the treatment of Staphylococcus aureus-infected full-thickness rat wounds compared to standard control treatment with a gauze. Overall, these results represent the core-shell/EO mat's potential as a newly developed wound dressing for bacteria-infected full-thickness skin injuries.

Prevalence of superficial-cutaneous fungal infections in Shiraz, Iran: A five-year retrospective study (2015-2019).

BACKGROUND: Superficial and cutaneous fungal infections are common in tropical areas. The aim of this study was to provide a basic database of superficial and cutaneous mycoses and the most common etiological agents among patients. METHODS: Between 2015 and 2019, a total of 1807 patients suspected of superficial and cutaneous mycosis referring to the mycology laboratory of Shiraz medical school, Fars, Iran were evaluated. Specimens were taken from the patients' affected area, and clinical samples were examined by direct microscopy and culture. The epidemiological profile of the patients was collected. RESULTS: A total of 750 patients were confirmed with mycoses. Positive samples totaled 750 cases consisting of the nail (373/49.7%), skin (323/43%), head (47/6.26%), and mucosal membrane (4/0.5%). The yeasts group included 304 Candida spp. (70.3%), 123 Malassezia spp. (28.47%), and 5 Rhodotorula spp. (1.1%). The filamentous fungi were distributed as 34.8% dermatophytes and 7.5% non-dermatophyte. The clinical types of dermatophytosis were tinea unguium (110/261), tinea capitis (50/261), tinea pedis (48/261), tinea corporis (37/261), and tinea cruris (16/261). Non-dermatophyte molds included A. flavus 17, A. niger 4, Aspergillus spp. 15, Penicillium. 10, Fusarium 6, Mucor 2, Stemphylium 1, and Alternaria 1. CONCLUSION: This study provides useful data for the study trends of superficial and cutaneous fungal infections in a specific area. The mycological data confirmed higher incidence of candidiasis (mainly onychomycosis) and dermatophytosis in patients affected by fungal pathogens, which helped to better understand the epidemiological aspects of these mycoses.

Dissolvable carboxymethyl cellulose/polyvinylpyrrolidone microneedle arrays for transdermal delivery of Amphotericin B to treat cutaneous leishmaniasis.

Cutaneous leishmaniasis (CL) is a significant public health problem caused by different species of Leishmania parasites. Due to low skin permeability, the development of an effective system for delivery of Amphotericin B (AMB), the common effective drug for leishmaniasis treatment, is required to replace the unpleasant and problematic injections. To overcome this problem, a dissolvable microneedle (MN) patch was developed, using biodegradable polymers (a mixture of polyvinylpyrrolidone and carboxymethyl cellulose) for AMB's transdermal delivery. Scanning electron microscopy and fluorescent images showed successful fabrication of the MNs and homogeneous dispersion of the drug into the needles. MNs showed good mechanical properties with the ability to penetrate the rat skin and reach the lower layers. After insertion to the skin, the MNs were rapidly dissolved to release the encapsulated drug, and the resulted micropores in the skin were quickly resealed within 30 min. MN patches showed non-toxicity as exposed to HT-29 cell line. Flow cytometry results showed a potent in vitro leishmanicidal activity of AMB-loaded MN patches against the Leishmania parasites (up to 86% of the parasites' death). Taken together, MN patches might represent a new, efficient and clinically translational approach for transdermal AMB delivery to treat CL.

Core-shell chitosan/PVA-based nanofibrous scaffolds loaded with Satureja mutica or Oliveria decumbens essential oils as enhanced antimicrobial wound dressing.

Wounds are prone to bacterial infections, which cause a delayed healing process. Regarding the emergence of bacterial resistance to common antibiotics, using natural antimicrobial agents can be beneficial. Chitosan is a biological polymer, which has shown partial antioxidant and antimicrobial activities. In this study, core-shell nanofibrous scaffolds composed of chitosan (CS)/polyvinyl alcohol (PVA) as the core and polyvinylpyrrolidone (PVP)/ maltodextrin (MD) as the shell were developed. Satureja mutica (S. mutica) or Oliveria decumbens (O. decumbens) essential oil (EO) was encapsulated into the core of the produced scaffolds. The broth microdilution analysis showed significant antimicrobial activity of the EOs. The SEM analysis indicated that the unloaded and loaded core-shell scaffolds with S. mutica or O. decumbens EO had a uniform, beadless structure with fiber mean diameters of 210 ± 50, 250 ± 45, and 225 ± 46 nm, respectively. The CS/PVA-PVP/MD and CS/PVA/EO-PVP/MD scaffolds indicated suitable mechanical properties. The addition of the studied EOs enhanced the antioxidant activity of the scaffolds. The antimicrobial test of produced scaffolds showed that loading of 10% S. mutica or O. decumbens EO could broaden the microbicidal activity of the CS/PVA-PVP/MD scaffolds. These results revealed that the CS/PVA/EO-PVP/MD nanofibrous scaffolds are promising candidates for wound dressing.